Products

Products

  • 10Bar Cummins Diesel Engine Pressure Sensor transmitter 3846N-010-B(-C2)

    10Bar Cummins Diesel Engine Pressure Sensor transmitter 3846N-010-B(-C2)

    These pressure sensor is commonly used in Cummins diesel engine, this product has been matched with the main engine, the pressure range is 0-10BAR (0-1.0Mpa), the detection pressure point is 0bar, 2bar, 4bar, 6bar, 8bar, 10bar,  the corresponding resistance value is the conventional 10-184Ω ohm,  installation Hex Nut size: S18, installation thread is NPT1/8,

  • MS24539 Pressure Transmitter 0-120psi NSN 6620009935546 Pressure Sending Unit Senor

    MS24539 Pressure Transmitter 0-120psi NSN 6620009935546 Pressure Sending Unit Senor

    Oil pressure sending unit p/n MS24539-1. NSN 6620009935546, MS24539, MS245391

    Measuring range 0-120 PSI.

    Also replaces p/n 7416363, 800213, 40-2500915, JHP85-430. This sending unit is used on many 2.5 and 5 ton trucks and also the HMMWV. Sender works with the MS24540-2 and 12338471 gauges. 

  • 8Bar Unconventional 245-28Ω  Oil Press Gauge Sensor With Alarm 0.8Bar

    8Bar Unconventional 245-28Ω Oil Press Gauge Sensor With Alarm 0.8Bar

    This sensor’s corresponding resistance value is unconventional 245-28Ω gradually from high 245Ω to 28Ω, which is customized according to the requirements of functional parameters,with Alarm point is 0.8Bar;

    the pressure range of the sensor is 0-8Bar,The thread fitting of Intallation: M14X1.5mm with Chiave wrech CH17;

    VGS series is VSG40030/3 is widely used for  Pleasure and professional vessels – Special vehicles and applications – Diesel engine and Generator sets-Heavy industry and SAR vessels ….etc

  • 10Bar 10-184Ω Diesel Engine Oil Pressure Gauge Sensor With Alarm 0.65Bar For Heavy Truck

    10Bar 10-184Ω Diesel Engine Oil Pressure Gauge Sensor With Alarm 0.65Bar For Heavy Truck

    This GY-11 prerssure sensor corresponding resistance value is 10-184Ω with Alarm point is 0.65Bar;

    the pressure range of the sensor is 0-10Bar,The thread fitting of Intallation: M18X1.5mm with Chiave wrech S24;

    It’s generally used in Automobile industry,motor vehiciles, automotive, electrical, instrumentation, construction machinery, agricultural machinery and a variety of professional machinery Special vehicles and applications – Diesel engine and Generator sets-Heavy industry and SAR vessels ….etc

  • 10-184Ω KE21005 Single Pin Diesel Engine Oil Pressure Gauge Sensor

    10-184Ω KE21005 Single Pin Diesel Engine Oil Pressure Gauge Sensor

    This KE21005 prerssure sensor corresponding resistance value is 10-184Ω

    the pressure range of the sensor is 0-5Bar,The thread fitting of Intallation: NPT1/8 ; with Single pin output :M4.

    It has good anti-vibration performance, long service life, easy installation, stable quality, reliable performance, wide operating temperature range.

  • 10-184Ω 150053 Diesel Engine Oil Pressure Gauge Sensor With Alarm 0.8Bar

    10-184Ω 150053 Diesel Engine Oil Pressure Gauge Sensor With Alarm 0.8Bar

    This 150053 prerssure sensor corresponding resistance value is 10-184Ω with Alarm point is 0.8Bar; the pressure range of the sensor is 0-10Bar,The thread fitting of Intallation: NPT1/8;

    This pressure sensor is strictly approved by the automobile industry: QC/T822-2009 and ISO/TS16949 all standard requirements

  • M10 X1.0 10Bar Insulation Mechanical Oil Pressure Gauge Sensor Without Alarm

    M10 X1.0 10Bar Insulation Mechanical Oil Pressure Gauge Sensor Without Alarm

    This Insolation pressure range of the sensor is 0-10Bar, the corresponding resistance value is the conventional 10-180Ω, Thread fitting: M10X1.0;without the Alarm; VGS series is VSG40016/PI is widely used for  Pleasure and professional vessels – Special vehicles and applications – Diesel engine and generator sets-Heavy industry and SAR vessels ….etc

  • M14 X1.5 10Bar Oil Pressure Gauge Sensor With Alarm 0.7 Bar For Special vehicle

    M14 X1.5 10Bar Oil Pressure Gauge Sensor With Alarm 0.7 Bar For Special vehicle

    This pressure range of the sensor is 0-10Bar, the corresponding resistance value is the conventional 10-180Ω, Thread fitting: M14X1.5mm,CH19 ;with the Alarm point is 0.7±0.15Bar ; VGS series is VSG40016/A14 is widely used for  Pleasure and professional vessels – Special vehicles and applications – Diesel engine and generator sets-Heavy industry and SAR vessels ….etc

  • 8Bar Unconventional 245-28Ω Single Pin Genuine Oil Press Gauge Sender Unit

    8Bar Unconventional 245-28Ω Single Pin Genuine Oil Press Gauge Sender Unit

    This Single pin sensor’s corresponding resistance value is unconventional 245-28Ω gradually from high 245Ω to 28Ω, which is customized according to the requirements of functional parameters,without Alarm;

    the pressure range of the sensor is 0-8Bar,The thread fitting of Intallation: M10X1.0mm with Chiave wrech CH17;

    VGS series is VSG40030/2 is widely used for  Pleasure and professional vessels – Special vehicles and applications – Diesel engine and generator sets-Heavy industry and SAR vessels ….etc

  • 360-081-032-002C  5Bar Insulation Pressure Sensor transmitter for DAF

    360-081-032-002C 5Bar Insulation Pressure Sensor transmitter for DAF

    The 360081032002C / 880-00084 pressure range of this sensor is 0-5BAR,the Shell insulation。The output port is 2-M4, and the corresponding resistance value is the conventional 10-184 Ω ,without Alarm. It,s can also replace DAF 236776.

    When the pressure changes, the resistance value inside the sensor will change accordingly, and the different resistance values will be transmitted to the controller.

    The shell does uncommunicate with the equipment, and there is no low-voltage alarm function. The appearance adopts the form of iron galvanized, has the function of rust prevention, can be stored and used for a long time.

  • 3846N-010-B/C2 10Bar Construction Vehicle Cummins Diesel generator Engine Pressure Sensor

    3846N-010-B/C2 10Bar Construction Vehicle Cummins Diesel generator Engine Pressure Sensor

    The  3846N-010-B/C2  pressure sensor is commonly used in  Cummins Diesel generator Engine Pressure Sensor , this sensor has been matched with the main engine, the pressure range is 0-10BAR (0-1.0Mpa), the detection pressure point is 0bar, 2bar, 4bar, 6bar, 8bar, 10bar,

    the corresponding resistance value is the conventional 10-184Ω ohm,  installation Hex Nut size: S18, installation thread is NPT1/8,

    Feature : Superior long term stability, Temperature compensated over wide range ,Low power consumption, Excellent repeat-ability / Hysteresis
    Special design for customer

  • JE21126 SRP-TR-0-10 NPT1/8 Mechanical Oil Pressure Sensor for Marine Vessels Yacht Boat

    JE21126 SRP-TR-0-10 NPT1/8 Mechanical Oil Pressure Sensor for Marine Vessels Yacht Boat

    This JE21126 SRP-TR-0-10 pressure sensor is used in all kinds of Ships, Marine Vessels, Yacht Boat Auto  ect with other engines generators for accurate pressure monitoring.The pressure range of the sensor is 0-10Bar, the corresponding resistance value is the conventional 10-184Ω, Thread fitting: NPT1/8 ,  KUS JE21126 SRP-TR-0-10

  • SRP-TR-0-10  NPT1/8 10Bar Mechanical Oil Pressure Sensor Transducer Pressure Switch for Aerial working machinery

    SRP-TR-0-10 NPT1/8 10Bar Mechanical Oil Pressure Sensor Transducer Pressure Switch for Aerial working machinery

    This SRP-TR-0-10 pressure sensor is main applied to all kinds of Aerial working machinery engines, for accurately monitor the pressure of the generator, also to ensure the safety of working at altitude. has been obtained the QC/T822-2009, ISO/TS16949, RoHs and Reach Certificates.

  • 3846N-010-B(-C2)0-10Bar,10-184Ω Cummins Engine Oil Pressure Sensor Transducer

    3846N-010-B(-C2)0-10Bar,10-184Ω Cummins Engine Oil Pressure Sensor Transducer

    These 3846N-010-B(-C2) pressure sensor is commonly used in Cummins diesel engine, this product has been matched with the main engine, the pressure range is 0-10BAR (0-1.0Mpa), the detection pressure point is 0bar, 2bar, 4bar, 6bar, 84bar, 10bar,the corresponding resistance value is the conventional 10-184Ω ohm,  installation Hex Nut size: S18, installation thread is NPT1/8, 

  • STS304 Bimetal thermostat water & oil proof temperature switch

    STS304 Bimetal thermostat water & oil proof temperature switch

    This is Customized directly to the customer’s drawings and functional requirements  which the waterproof, rustproof and expansion resistant STS304 Bimetal thermostat temperature switch,

    The insulating STS material is used.

  • 0.5-4.5V Automobile Electronics Pressure Transducer Sensor with Screw Output

    0.5-4.5V Automobile Electronics Pressure Transducer Sensor with Screw Output

    This is the electronic oil pressure sensor with 0-12BAR engine pressure sensor,with the triangle screw output interface, Using silicon chip as pressure sensing element, high sensitivity, good linearity and strong anti-interference ability.

  • M14X1.5 Automotive Electronics Pressure Transducer Sensor

    M14X1.5 Automotive Electronics Pressure Transducer Sensor

    Our pressure sensor manufacturers use silicon chips as pressure sensing components, high sensitivity, good linearity, strong anti-interference ability. The silicone oil encapsulation protection structure is used to isolate the silicon wafer from the medium, so as to avoid the corrosion or pollution of the pressure medium to the silicon wafer. The product can ensure that the joint is not loose and the seal is stable after long-term high and low temperature changes, improving the reliability of the product.

  • 0-3Mpa Auto Electronics Pressure Transducer Sensor Switch

    0-3Mpa Auto Electronics Pressure Transducer Sensor Switch

    Considering the harsh working environment of the car, the sensor requirements are very strict.

    In the design of electronic oil pressure sensor, it is not only necessary to choose high temperature resistance, corrosion resistance, high precision pressure measuring device and reliable performance, working temperature range of components, but also need to take anti-interference measures in the circuit, improve the reliability of the sensor.

  • NPT3-8 max120℃ Thermostat Temperature Sensor Switch

    NPT3-8 max120℃ Thermostat Temperature Sensor Switch

    It is widely used in engine water tank temperature detection of automobiles, ships and generator sets. It has temperature detection and temperature alarm function, wide product specifications and functions to choose from. Customized products according to customers’ needs.

     

  • 880-00048/ PD121222 96℃  NPT3/8 Engine Coolant Water Temperature Gauge With Alarm for Boat Ship

    880-00048/ PD121222 96℃ NPT3/8 Engine Coolant Water Temperature Gauge With Alarm for Boat Ship

    The   880-00048 / PD121222  is the popular type of switch widely used on ships,boats, yacht etc, Install on radiator or cooling system piping. Bimetallic disk is a kind of sensor element that changes its state depending on the temperature of coolant.

    When it reaches a reserved set temperature, the disc snaps, shutting off the circuit that activates the radiator cooling fan.

  • M12x1.5 -20℃~180℃ Engine Coolant Temperature Thermostat Swith Without Alarm

    M12x1.5 -20℃~180℃ Engine Coolant Temperature Thermostat Swith Without Alarm

    This is the Universal M12 x1.5 oil / water temp sensor with out Alarm, temperature ranges from- 20-180℃/ 0-300f This is a one wire sensor, one for the signal to the gauge the sensor is earthed through the thread when screwed into the engine/sandwich plate.Single connection sensor (brass outer case is earthed)  Universal Fit on all Imported and Domestic Cars

  • 3682610-FF03500 0-1 Mpa Three Pin Air Pressure Sensor Transducer with 0.45Mpa Alarm For Dongfeng

    3682610-FF03500 0-1 Mpa Three Pin Air Pressure Sensor Transducer with 0.45Mpa Alarm For Dongfeng

    This  3682610-FF03500/XDL24 is three pin pressure sensor with 0.45Mpa Alarm , The pressure sensor is mainly applied to all kinds of  machinery engines to accurately monitor the pressure of the generator.The pressure range of the sensor is 0-1Mpa, the corresponding output resistance value is 10-184Ω, Thread fitting: M12X1.5.

  • Speed Sensor

    Speed Sensor

    • This speed sensor is the Simple structure, small size, no power supply, Direct and converted into electrical signal output, with strong anti-interference ability, wide temperature range, and not affected by the test site air pollution, oil pollution and other media,

  • VDO 803/1/25 Coolant temperature sender with Alarm 98°C – NPT3/8

    VDO 803/1/25 Coolant temperature sender with Alarm 98°C – NPT3/8

    The shell of the water temperature sensor is made of high quality brass material with extended editaion  , which has good temperature guiding effect and high precision of temperature signal transmission. VDO 803/1/25 with alarm 98°,The thread fitting of Intallation: NPT3 /8  can be customized

  • 10-184Ω JUP00032 Doosan Engine Pressure Gauge Sensor With 0.8Bar Alarm

    10-184Ω JUP00032 Doosan Engine Pressure Gauge Sensor With 0.8Bar Alarm

    This JUP00032 prerssure sensor corresponding resistance value is 10-184Ω with Alarm point is 0.8Bar;

    the pressure range of the sensor is 0-10Bar,The thread fitting of Intallation: NPTF1/8 ; with double output : M4;

    It’s generally used in Automobile industry,motor vehiciles, automotive, electrical, instrumentation, construction machinery, agricultural machinery and a variety of professional machinery, the power pipeline of vessel Ship hull , water treatment engineering etc…..

  • JUP00338 Engine Pressure Gauge Sensor With 1.4Bar Alarm

    JUP00338 Engine Pressure Gauge Sensor With 1.4Bar Alarm

    This JUP00338 prerssure sensor corresponding resistance value is 10-184Ω with Alarm point is 1.4Bar;

    the pressure range of the sensor is 0-10Bar,The thread fitting of Intallation: NPT1/8 ; with double output : M4-M6;

    It’s generally used in Automobile industry,motor vehiciles, automotive, electrical, instrumentation, construction machinery, agricultural machinery and a variety of professional machinery, the power pipeline of vessel Ship hull , water treatment engineering etc…..

  • Three-Pin Alarm Pressure Sensor Switch Sender Unit

    Three-Pin Alarm Pressure Sensor Switch Sender Unit

    This kind low pressure alarm sensor product is specially customized according to the special requirements protection fire system customers,After testing, it was immediately put into mass production and is regularly produced in large orders with hot sells.

  • M18X1.5 Mechanical 5Bar Diesel Engine Pressure Sender Unit For Agriculture

    M18X1.5 Mechanical 5Bar Diesel Engine Pressure Sender Unit For Agriculture

    It is widely used in various harvester, the engine pipe of vehicles and ships, water processing projects,inspection and control of indust rial processes, hydraulic and pneumatic control project s, etc. This Sensor  with inserts :output resistance value G(6.3-135°)with output alarm pressure WK(4.8-135°),the protective alarm point is 0.5BAR ; the pressure range of sensor is 0-5Bar,

  • NPTF1/8 10Bar Engine Insulation Pressure Gauge Sensor Pressure Swtich With 0.75Bar Alarm

    NPTF1/8 10Bar Engine Insulation Pressure Gauge Sensor Pressure Swtich With 0.75Bar Alarm

    This pressure range of the sensor is 0-10Bar, the corresponding resistance value is the conventional 10-180Ω,the Alarm point is 0.75Bar ±0.15Bar; Thread fitting is NPTF1/8,CH17 Insulation. This sensor is VDO matched, VGS series is VSG40016/A4 is widely used for  Pleasure and professional vessels – Special vehicles and applications – Diesel engine and generator sets-Heavy industryand SAR vessels ….etc 

  • M14X1.5 Single Pole Cummins Diesel Engine Pressure Gauge Sensor 10Bar Without Alarm

    M14X1.5 Single Pole Cummins Diesel Engine Pressure Gauge Sensor 10Bar Without Alarm

    This pressure range of the sensor is 0-10Bar, the corresponding resistance value is the conventional 10-180Ω, Thread fitting: M14X1.5; the sensing pressure and convert it into electrical signals, signal strength depends on the pressure applied, using strict process control to ensure excellent quality, interface can be made according to customer needs, output resistance value can be configured according to customers.This sensor is VDO matched,

    The  VGS series is VSG40016/2 is widely used for  Pleasure and professional vessels – Special vehicles and applications – Diesel engine and generator sets-Heavy industry and SAR vessels ….etc

  • M10 X1.0 Diesel Engine Pressure Gauge Sensor Pressure Swtich With 0.9Bar Alarm

    M10 X1.0 Diesel Engine Pressure Gauge Sensor Pressure Swtich With 0.9Bar Alarm

    This pressure range of the sensor is 0-10Bar, the corresponding resistance value is the conventional 10-180Ω;the Alarm point is 0.9Bar +-0.15Bar; Thread fitting is M10X1.0 ,it is VDO matched,, VGS series is VSG40016/A is widely used for Pleasure and professional vessels – Special vehicles and applications – Diesel engine and generator sets-Heavy industry and SAR vessels ….etc

     

     

  • 0-100Psi 264-28Ω Double Pin Engine Oil Pressure Swtich Transmitter Without Alarm

    0-100Psi 264-28Ω Double Pin Engine Oil Pressure Swtich Transmitter Without Alarm

    This 880-00024 pressure sensor transmitter is exported overseas and customized to the specific requirements of overseas customers:The pressure range 0-100 psi; corresponding resistance from high to the bottom; resistance value is thel unconventional 264-28Ω, 

    This sensor has strictly passed the Automotive Industry: QC/T822-2009 and ISO/TS16949 all standard requirements, Testing items include: Error accuracy, Overload pressure, High and low temperature test, Waterproof, Anticorrosive, Shockproof, Collision resistance, Durability test and so on, can work in harsh environment and Bad weather for a long time.
    It can keep monitoring the working state of engine in real time accurately.

     

     

     

  • PORSCHE 92860620302  VDO360-081-034-004C Diesel Engine Oil Pressure Switch Sensor Sender Unit

    PORSCHE 92860620302 VDO360-081-034-004C Diesel Engine Oil Pressure Switch Sensor Sender Unit

    This is PORSCHE 92860620302  VDO360-081-034-004C pressure sensor product is widely used in: PORSCHE, BWD,  MERCEDES-BENZ,VDO, SIEMENS VDO,MEYLE etc,and so on all kinds of Diesel Engine  also Cross Interchange Part No. for 1S6675, 8090, PS284, PS271, 5333624, 14990, 70542000, 310029, 8090, 92860620301, 88924422, 0025421717 ,2011519 ,E1821A, OP6154 ,S4095, 92860620304 ,0142044, 0148200003, 09612 , 360081034004C, E1821A OPS154, 70631 A0025421717, 310024,70542000, 360-081-034-004C,  6750041044 ,OP25761, PS234, OP251, 5333728, S4095

     

  • Instrument Panel

    Instrument Panel

     

    Being familiar with the parts of your vehicle and how they work together is an important part of being a safe driver.

     

     

     

    oil sensor instructment

    speed sensor instrucment

     

    water temperature instructment

  • Speed Sensor

    Speed Sensor

    The speed sensor adopts passive electromagnetic induction technology.
    The gear cuts the magnetic field motion with the outputs sinusoidal pulse signal, which is collected and calculated by MCU to obtain the speed rate.

     

  • 360-081-029-065C 29065 253527 Auto Mechanical Oil Pressure Switch Sender Unit

    360-081-029-065C 29065 253527 Auto Mechanical Oil Pressure Switch Sender Unit

    This 360-081-029-065C, 29065, 253527 pressure sensor product is widely used in: SCANIA,IVECO, BEN and so on all kinds of trucks,  commercial vehicles, buses and so on including heavy trucks and process vehicles…

  • JUP00028B SRP-TR-0-5  G1/8 5Bar Thick film Oil Engine Air Pressure Sensor With Alarm

    JUP00028B SRP-TR-0-5 G1/8 5Bar Thick film Oil Engine Air Pressure Sensor With Alarm

    The JUP00028B SRP-TR-0-5  Air Pressure Sensor is the thick film pressure sensor with Alarm 1.45bar

  • M10X1.0 10Bar Insulation 9-184Ω Generator Pressure Sensor Sender Unite Without Alarm

    M10X1.0 10Bar Insulation 9-184Ω Generator Pressure Sensor Sender Unite Without Alarm

     M10X1.0 10Bar Insulation 9-184Ω Generator Pressure Sensor Without Alarm ,The insulation case is not grounded;  the corresponding resistance value is 9-184Ω,  the thread fitting is M10X1.0,This engine oil pressure sensor has been paired with the  gernerator engine operations,

     the oil pressure sensor is an important part of the engine, used for pressure measurement and control, widely used in vehicles and ships of various engine pipelines, water treatment engineering, industrial process detection and control, hydraulic and pneumatic control engineering.

  • 2Bar 150015A Three Pin Engine Generator Pressure Sensor Sender Unite With Alarm

    2Bar 150015A Three Pin Engine Generator Pressure Sensor Sender Unite With Alarm

    This 150015A the pressure range of the sensor is 0-2Bar,with three pin sensor’s corresponding resistance value is 10-184Ω ,with Alarm point 0.4bar ±0.1bar;
    The thread fitting of Intallation:NPT1/8 with THree pin are M4; Case ungrounded

     the oil pressure sensor is an important part of the engine, used for pressure measurement and control, widely used in vehicles and ships of various engine pipelines, water treatment engineering, industrial process detection and control, hydraulic and pneumatic control engineering.

  • M10X1.0 VDO Mechanical Oil Pressure Gauge Sensor with 0.5 Bar Alarm

    M10X1.0 VDO Mechanical Oil Pressure Gauge Sensor with 0.5 Bar Alarm

    This sensor is VDO matched,and with Alarm point :0.5Bar ±0.15  This engine oil pressure sensor has been paired with the engine operations, the oil pressure sensor is an important part of the engine, used for pressure measurement and contro, VGS series modle number is VSG40016/A6 is widely used for  Pleasure and professional vessels – Special vehicles and applications – Diesel engine and generator sets-Heavy industry and SAR vessels ….etc

12 Next > >> Page 1 / 2