Products
-
CDYG3-02010301 NPT1/8 10Bar Mechanical Oil Pressure Sensor Transducer Pressure Switch for Aerial working machinery
This engine pressure sensor is mainly applied to all kinds of Aerial working machinery engines to accurately monitor the pressure of the generator. And ensure the safety of working at altitude
-
OIL/WATER FUEL TANK LEVEL SENSOR FULE TANK SENING UNITE
the liquid level sensor of the oil tank and water tank adopts the principle of magnetic field to control the spring pipe electrocution on and off, converts the change of the measured liquid level into electrical signal output and connects with the instrument, so as to detect the height of the liquid level.
-
NTPF1/8 10Bar Engine Pressure Sensor transmitter 880-00072/ VDO 360-081-030-150
The NTPF1/8 10Bar Engine Pressure Sensor transmitter 880-00072/ VDO 360-081-030-150 is a 10-184Ω vdo universal oil pressure sensor, and The thread fitting is NPTF1/8, which can be designed and customized according to the customer’s use. It has a connecting insertion plate, alarm pressure is 0.8BAR, and the measuring range is 0-10BAR. The appearance is galvanized iron, which has the function of rust prevention, and can be stored and used for a long time. Widely used, can be common with VDO products, domestic and foreign manufacturers are using this pressure sensor.
-
Auto Electronics Pressure Transducer Sensor
Our pressure sensor manufacturers use silicon chips as pressure sensing components, high sensitivity, good linearity, strong anti-interference ability.
-
M14X1.5 Automotive Electronics Pressure Transducer Sensor
Our pressure sensor manufacturers use silicon chips as pressure sensing components, high sensitivity, good linearity, strong anti-interference ability. The silicone oil encapsulation protection structure is used to isolate the silicon wafer from the medium, so as to avoid the corrosion or pollution of the pressure medium to the silicon wafer. The product can ensure that the joint is not loose and the seal is stable after long-term high and low temperature changes, improving the reliability of the product.
-
M10X1.0 5Bar Mechanical Oil Pressure Sensor Transducer Pressure Switch
Our the Pressure switches and pressure sensors are used to ensure accurate system pressure and can alert operators when/if a problem arises.
-
10Bar JE2166A Signle Pin Pressure Sensor transmitter
This pressure sensor is 10Bar Signle Pin Pressure Sensor transmitter with the Black injection molding, colorful appearance, oval shape, the corresponding resistance value is the conventional 10-184Ω, the output of single terminal, the binding post is the general size M10X1.0, when the pressure changes, the internal resistance value of the sensor will change, the different resistance values will be transmitted to the controller, the shell and the equipment conduction ground, no low voltage alarm function. The appearance adopts the form of iron galvanized, has the function of rust prevention, can be stored and used for a long time. It can also be customized according to your requirements
-
WD-NPT3-823 NPT3/8 Engine Coolant WaterTemperature Sensor
The case of the water temperature sensor is made of high quality brass material, with sensitive temperature guidance and high transmission accuracy of the temperature signal.
-
0-3Mpa Auto Electronics Pressure Transducer Sensor Switch
Considering the harsh working environment of the car, the sensor requirements are very strict.
In the design of electronic oil pressure sensor, it is not only necessary to choose high temperature resistance, corrosion resistance, high precision pressure measuring device and reliable performance, working temperature range of components, but also need to take anti-interference measures in the circuit, improve the reliability of the sensor.
-
3846N-010-C2 10Bar Oil Pressure transmitter for Construction vehicle Cummins Diesel generator
Cummins diesel engine. This product has been matched with the main engine, mainly applicable to EQ153 twin bridge model (Cummins).
-
10Bar Pressure Sensor transmitter 880-00073/ VDO 360-081-030-009C
This pressure sensor is 10Bar Pressure Sensor transmitter with the corresponding resistance value is the conventional 10-184Ω, the thread fitting is general size M10X1.0, when the pressure changes, the internal resistance value of the sensor will change, the different resistance values will be transmitted to the controller, the shell and the equipment conduction ground, no low voltage alarm function. The appearance adopts the form of iron galvanized, has the function of rust prevention, can be stored and used for a long time. Widely used, can be common with VDO products, domestic and foreign manufacturers are using this pressure sensor.
-
96° NPT3/8Engine Coolant Oil Water Temperature Gauge With Alarm for Boat Ship
This is the popular type of switch widely used on ships，boats, yacht etc， Install on radiator or cooling system piping. Bimetallic disk is a kind of sensor element that changes its state depending on the temperature of coolant.
When it reaches a reserved set temperature, the disc snaps, shutting off the circuit that activates the radiator cooling fan.
